Fort McMurray is in Northern Alberta, Canada is the location of a very large, rich oil fine sand field. The Athabasca oil sands are named for that Athabasca River, where the oil sands tend to be easily observed in the water banks. One third of the planet"s oil sands are found here in Alberta, Canada and in Venezuela. The actual Athabasca oil sands field is actually distinctive for the reason that the actual oil sands are located very close to the surface and can end up being easily surface found. This particular makes it much cheaper in order to my own, as well as creates Athabasca the leading supplier associated with oil sands in the world.
Fort McMurray Oil sands
Fort McMurray oil sands are a solid type of oil also known as tar sands. They are made up of clay and sands that are covered within bitumen oil. Bitumen oil is so thick it must be warmed in order to make this circulation. Therefore, oil sands are very thick and sticky. Oil sands contain some water. This particular brings about sticky in the summer so that as solid because rock and roll during the cold months, when the drinking water is freezing.
Fort McMurray Oil Sands
Strip mining in Fort McMurray is the easiest and most common way to mine with regard to oil sands. In order to strip my own, we just have to search a big hole. Then we can drive in big trucks and bulldozers to find the oil sands out of the floor. We get the oil sands on to the trucks after which mix them with drinking water. This particular assists separation the clumps as well as turn the oil sands right into a much more fluid substance called slurry. Turning the actual oil sands in to slurry makes it possible to transport through pipelines to a plant. In the plant, the actual oil is actually separated from the fine sand and the oil is sent to a refinery for processing. Here, the oil could be turned into artificial oil and other petroleum items.
When deeper sections of the oil sands career fields tend to be experienced, after that strip mining isn"t actually a choice. We have to go much deeper to get at the actual oil sands. You can observe wherever this would produce a challenge, considering that the actual oil sands are extremely sticky and may end up being solid or even near solid. In order to fight this issue, we are able to pump water into the floor. Mixing the actual oil sands using the drinking water turns this into slurry underground. This makes it easier to draw out by simply moving it out. An additional type of removal is to pump motor air to the book. The actual oxygen is placed on fire, in a controlled style, and the bitumen is actually dissolved down to some fluid condition. Then, the oil sands can be moved out.
In some instances, we identify areas where oil sands can be found through the tar starts that they"ll form at first glance. Tar starts tend to be created once the pitch and tar rise to the surface as well as individual from the sand. These types of toss tar pits are well known for nearly perfectly protecting primitive animals which obtained trapped included. The most well known tar pit may be the La Crac tar pit within California. Another famous tar pit is in Trinidad. This particular tar pit is actually the size of a river and could be up to 200 as well as fifty ft deep. It"s believed to be situated directly more than a problem line within the earth.
The closest city to the oil sands is Fort McMurray, Alberta.
Thank you for visiting the Fort McMurray Oil Sands Page