Flat-rate furnace cleaning across Edmonton — blower, coil area, return drops and every duct run connected to them, for one published price. No travel surcharge, no upsell at the door, no “we found something” phone call halfway through.
Every furnace price already includes its ducting and diffusers. See the full source-removal process on the main furnace cleaning page.
Edmonton is not a generic market, and a furnace here does not live the same life as a furnace in Vancouver. Three local factors do most of the damage, and they hit different parts of the city differently.
Large parts of Edmonton were built long before the suburbs west of us existed. Mill Woods went up through the 1970s. Glenora, Crestwood, Westmount and Highlands date to the 1930s through 1950s. Beverly and Bonnie Doon sit somewhere in between. A great many of those homes still move air through their original trunk-and-branch ductwork, and a meaningful share were converted from old gravity “octopus” furnaces — systems designed around wide, slow ducts that were never intended to be scoured clean by air velocity.
Wide, slow ducts are excellent at one thing: letting debris settle and stay settled. When we open a return drop in a 1960s Mill Woods bungalow that has never been cleaned, we are not finding this year’s dust. We are finding sixty years of it, layered, along with construction sand from the original build and, more often than people expect, the remains of whatever the previous owners’ pets shed.
At the other end of the city, Windermere, Keswick, Terwillegar, Secord, Stillwater, Rosenthal, Starling and Trumpeter are still filling in. New construction means drywall dust, sawdust and silica in ductwork that has only existed for a few years — and in a brand-new home the furnace is frequently run during construction with nothing but a builder’s filter in place, which is close to no filter at all.
This is why a five-year-old home in southwest Edmonton often comes out dirtier than a thirty-year-old one in the west end. If your house is on a street where other lots are still being built, add ongoing site dust to the equation.
When Edmonton drops to −30 °C or below, your blower is not cycling. It is effectively running, and it can stay that way for days. Every hour of that pushes the entire volume of your home’s air through the furnace and back out through the ducts several times over. A system that is carrying debris does not carry it quietly during a cold snap — it redistributes it into the rooms you are sealed inside.
Layer on the river valley’s poplar and birch pollen every spring, and the wildfire smoke seasons that have become a routine part of Alberta summers, and you have a system that is asked to handle more particulate than most Canadian cities put through theirs.
If your Edmonton home is pre-1980 and has never been cleaned, or post-2015 and has never been cleaned, you are in the two groups that see the biggest change. Everyone in between is usually on the standard three-to-seven-year rhythm.
One flat rate covers the furnace and everything connected to it. Here is what that actually means.
The squirrel-cage blower is where the finest material collects, packed into the fins. A loaded blower moves less air, works harder and costs more to run. It is the single highest-impact thing we clean.
Directly above the blower, the A-coil catches everything the filter misses — and because it’s damp in cooling season, what lands there tends to stay and build into biofilm. The return drops beside it are the dirtiest ducts in the house.
Every supply run, every return, every diffuser connected to that furnace — included in the price, not quoted as an add-on. Cleaning the equipment and leaving the ducts is half a job.
The whole system is put under suction before anything is agitated. That’s the difference between debris leaving your house and debris being pushed into your living room — and it’s the step cheap operators skip.
A truck-grade vacuum is connected to the trunk line so the entire system is pulling inward before a brush touches anything. Nothing we loosen has anywhere to go except out.
The blower is cleaned properly, not wiped at. The coil area and return drops — where the heaviest build-up lives — are cleaned in the same pass.
Every run and diffuser connected to that furnace is agitated so settled debris breaks free and is drawn out. This is where an old Edmonton trunk system gives up decades of material.
We tell you what MERV rating your specific furnace can safely handle and how often to change it. Straight advice, and we don’t sell filters, so there’s nothing in it for us either way.
Our technicians photograph the inside of your system before and after. You see what was in there. It is the only honest way to sell a service that happens inside walls you can’t look into.
This is the entire price list. There is no Edmonton travel charge and no per-vent pricing.
Includes the furnace and every duct run and diffuser connected to it. The standard job for the majority of Edmonton homes.
The same job plus A/C coil cleaning. Worth doing together — the coil sits directly in the airflow path you just cleaned.
Common in larger Windermere and Terwillegar homes, and in older properties with a secondary system for an addition or suite.
Zoned dampers add real work. We price them honestly rather than pretending they’re free and making it up elsewhere.
Per-vent pricing is how a $200 quote becomes an $800 invoice. We publish one number so you can compare us honestly against anyone else in Edmonton before you pick up the phone.
Flat-rate pricing, anywhere in Edmonton. Usually booked within the week.
Most customers book more than one. Bundling saves a second trip and a second booking.
We cover all of Edmonton at the same flat rate. These are the areas we’re in most often — if yours isn’t listed, we still service it.
Looking for everything we do in the city? See the full Edmonton service page, or browse all communities we cover.
Tell us a little about your home and we’ll get right back to you with honest, flat-rate pricing — no obligation.
No obligation. We’ll reply with flat-rate pricing.
Or call us directly at 780-932-7337