Serving Spruce Grove, Stony Plain & the Greater Edmonton Area 📞 780-932-7337 | ✉ info@homeprosgroup.com
Home›Service Areas›St. Albert›Attic Insulation
Serving St. Albert Since 2002

Attic Insulation in St. Albert.

Blown-in attic insulation for a city where whole neighbourhoods were built in the same handful of years — and are therefore short by the same handful of inches. Free attic check, one written number.

4.9 average from 46 Google reviews — read them on Google.

Get a Free Quote 📞 Call 780-932-7337
St. Albert · Blown-In Top-Up · Free Attic Check
Free attic check
We measure what you have, then quote one flat number.
  • Depth measured & photographed before any quote
  • Blown fiberglass or cellulose — your call
  • Baffles kept clear at the eaves
  • No St. Albert travel surcharge
Request My Free Quote

An attic is measured, not guessed at

Depth is the only number that matters, and it takes ten minutes with a ruler to establish. See exactly how we measure, what we blow and where the code numbers come from on the main attic insulation page.

How It Works →
Built In One Window

St. Albert’s Attics Are Unusually Easy To Predict

Most cities in the region are a patchwork of eras. St. Albert isn’t. A very large share of its housing went up inside a twenty-year stretch, which means whole streets have the same attic, built to the same spec, settled by the same amount.

The sixties and seventies core: the same house, several thousand times

Grandin, Akinsdale, Braeside, Forest Lawn, Mission, Sturgeon Heights and Lacombe Park are the heart of it. These homes were insulated to the standard of their day — commonly the equivalent of R‑20 to R‑40 depending on the exact year — and they have all been settling on the same schedule ever since. When we measure one Grandin bungalow we can usually predict the one next door to within an inch, and both are typically well under half of what a new St. Albert home is built to.

The eighties and nineties ring: better, still a generation back

Deer Ridge, Heritage Lakes, Inglewood, Oakmont, Pineview and Woodlands came in at a higher standard, and they are genuinely better attics. They are also thirty to forty years old, which is enough time for loose-fill to lose real depth. These rarely need dramatic work — they need topping back up to a modern number, which is the cheapest version of this job.

Erin Ridge North, Jensen Lakes and Riverside: leave them be

The newest neighbourhoods were built to the current effective‑R requirement and almost never need us. We will still come and measure for free, because the reassurance is worth something and because occasionally we find a genuine defect — a bath fan discharging into the attic is the usual one, and it is worth catching before it soaks the insulation you already paid for.

Ice dams: St. Albert’s most visible symptom

The mature streets here produce a spectacular crop of icicles every thaw. That is not a roof problem and it is not a gutter problem — it is heat escaping through the ceiling, melting snow high on the roof, and refreezing where the roof overhangs the cold eave. Depth at the perimeter is the fix. Our guide to ice dams on Alberta roofs covers the mechanism.

If your street looks like your neighbour’s street

It probably measures like it too. St. Albert’s big single-era neighbourhoods are the most predictable attics we work in — and the easiest to quote honestly, because we have measured hundreds of the same house.

Marked depth ruler standing in blown attic insulation showing measured inches
Same house, same street, same reading — usually within an inch.
Ventilation baffle installed at an attic eave keeping the soffit air channel clear
The eave channel stays open. Insulation at the perimeter is what stops ice dams.
What’s Included

What A Blown-In Top-Up Actually Involves

Insulation is one of the easiest trades to fake, because nobody climbs up to check. Here is what we do, and what you get to see afterwards.

A measured depth, not an estimate

We take depth readings at several points across the attic — not one convenient spot by the hatch — because settling is never even. You get the readings and the photos before you get a price, whether or not you hire us.

Fiberglass or cellulose — you choose

Blown fiberglass doesn’t settle much and stays put in a windy attic. Blown cellulose fills tighter around framing and top plates and is recycled. Both hit the same R-value; we’ll tell you which suits your attic and then blow whichever you pick.

Baffles, and the gap at the eaves

An attic needs air moving from the soffits upward. Insulation blown into that gap chokes the ventilation and causes exactly the moisture problem it was supposed to prevent. We keep the eave channel open, with baffles where they’re missing.

Depth markers and a photo record

Marked rulers get left standing in the insulation and the finished depth is photographed. Anyone — you, a home inspector, a buyer’s agent five years from now — can put their head through the hatch and read what was installed.

Our Process

How An Attic Top-Up Goes

01

We inspect and measure — free, and before any price

Depth readings across the attic, a look at the eave gap, the hatch, the bath-fan ducting and the state of what’s already there. You get the photos and the numbers regardless of whether you book the work.

02

You get one written number

Square footage, the depth you have, the depth you’re going to, the material, and a single all-in price. Not a per-bag rate that moves once the truck is in your driveway.

03

We prep before anything gets blown

Baffles at the eaves, a dam around the attic hatch so the new material doesn’t spill out every time you open it, and depth markers set across the span.

04

We blow to depth, then photograph it

The hose runs through the hatch and the material goes in to the marked depth. Then the finished attic is photographed against the markers, and those photos are yours.

What we check before we blow — and tell you about

Bath and range fans that vent into the attic instead of through the roof, gaps around the hatch and ceiling penetrations, and any sign of moisture. Burying those problems under fourteen inches of new insulation makes them worse and hides them. If your attic has one, you’ll hear about it before we start rather than after — and if it’s outside what we do, we’ll say so and you can call the right trade.

St. Albert Pricing

No Hidden Fees. No Upsells. Ever.

Insulation is the one thing we don’t publish a flat rate for — and it’s worth explaining why, because everything else on this site has a number attached to it.

The attic inspection is free

Measured depth at multiple points, photographs, and a straight answer about whether you actually need the work. No charge, no obligation, and you keep the numbers even if you hire somebody else.

One written number, all in

Material, labour, baffles, hatch dam and cleanup in a single figure before we start. If the attic turns out different from the quote, we stop and talk to you — the price doesn’t quietly grow.

R-50 or R-60 — priced both ways

We quote the two depths side by side so you can see what the extra costs. Once you’ve paid for the crew and the trailer, the incremental depth is mostly material — it’s the cheapest R-value you’ll ever buy.

Never priced by the bag

Per-bag pricing is how an insulation quote doubles. Bags are our problem. Depth across your ceiling is what you’re buying, and that’s what the number covers.

Why we won’t quote an attic over the phone

Because the honest answer depends on three things nobody knows over the phone: your attic’s square footage, how much insulation is up there now, and how evenly it’s spread. Anyone who gives you a firm insulation price without going up there is either guessing or planning to revise it later. We’d rather drive to your St. Albert address for free and tell you the truth — including, quite often, that your attic is fine and you should keep your money.

Cold upstairs? Ice on the eaves?

Free attic inspection anywhere in St. Albert — measured depth, photos, and a written number.

Get a Free Quote📞 780-932-7337
Signs You’re Short

Does Your St. Albert Attic Actually Need Topping Up?

You can see the ceiling joistsIf the tops of the joists are visible above the insulation, you’re at roughly R-20 or less — about a third of what a new home here is built to.
Icicles and ice dams every thawHeat escaping through the ceiling melts the snow on the roof, which refreezes at the cold eave. The ice is a symptom; the attic is the cause.
The upstairs can’t hold temperatureBedrooms that run cold in a January snap and hot in July are usually losing through the ceiling, not the windows everyone blames.
Frost or drips in the attic come springWarm damp air leaking up from the house freezes on the underside of the sheathing all winter, then melts all at once. It gets mistaken for a roof leak most years.
Nobody has touched it since the house was builtAn attic blown to the standard of 1985 or 1998 has also spent decades settling. What was installed and what’s measurable today are two different numbers.
The roof is being replaced anywayThe crew is already there and the attic is already disturbed. It’s the cheapest time to deal with the insulation you were going to deal with eventually.
While We’re There

Most Customers Book More Than One

Bundling saves a second trip and a second booking — add-on rates only apply while the truck is already in your driveway.

Insulation RemovalQuoted with the same visit Furnace Cleaning$345 + GST, ducts included Duct CleaningThe same flat rate Dryer Vent Cleaning$60 with this visit
St. Albert FAQ

Attic Insulation St. Albert: Frequently Asked Questions

Remarkably often, yes — usually within an inch of each other. Whole St. Albert neighbourhoods were built in the same short window to the same spec and have settled at the same rate. It is the one city where we can give you a fairly confident guess before we go up, though we still go up, because the exceptions are exactly the ones worth finding.
Almost always. Icicles and ice dams mean heat is getting through the ceiling and melting the snow above it, and the melt is refreezing out at the cold overhang. The cure is depth and a properly ventilated edge at the eaves, not roof work — which is why so many St. Albert homeowners end up paying for the wrong trade first.
Worth it for the free look, not usually for the work. New builds here meet the current standard. What we’re really checking is whether anything is discharging moisture into the attic — a bath fan venting into the space rather than through the roof is the classic, and it will quietly ruin good insulation over a few winters.
Edmonton and the surrounding region sit in climate zone 7A. A new home here needs an effective R‑59 attic, or about R‑49.2 if it has an HRV — the code trades approved ventilation against envelope performance. Those are effective numbers, which is why a compliant attic is usually blown deeper than the label suggests. The full breakdown, including what R‑50 and R‑60 look like in inches, is in our guide to what Alberta code requires in an attic.
Either is defensible. The first R‑20 does most of the work, so the jump from R‑50 to R‑60 saves comparatively little on its own — but because you’ve already paid for the crew and the equipment, that last stretch is nearly all material and it’s the cheapest R-value in the job. If budget is the constraint, R‑50 isn’t a compromise; it’s the threshold the rebate programmes themselves picked.
Usually, yes — and that’s the normal job. Old fiberglass or cellulose that’s dry and undisturbed is fine to build on; it hasn’t stopped working, there just isn’t enough of it. The exceptions are insulation that’s wet, mouldy, matted flat, or contaminated by rodents, which needs to come out first. That’s insulation removal, and we’ll tell you at the free inspection which of the two you’re looking at.
Neither, honestly. Blown fiberglass resists settling and doesn’t mind a draughty attic; blown cellulose packs in tighter around framing and top plates and is made from recycled paper. Both reach the same R-value at the depths we install. We’ll recommend one for your specific attic and then install whichever you decide on — we don’t earn more either way.
No. We do attics, and only attics. Drill-and-fill wall insulation is a genuinely different job with different risks in an older Alberta home, and we’d rather be good at one thing than adequate at two. If walls are your problem we’ll say so and you can bring in someone who specialises in it.
We stop, we don’t disturb it, and we tell you what you’re looking at. Vermiculite in a pre-1990 attic may contain asbestos, and removing it is regulated abatement work in Alberta requiring a licensed contractor — that is not us and we won’t pretend otherwise. You’ll get photographs and a plain explanation, and there’s no charge for the visit.
Most homes are a single visit of a few hours, start to finish, and you can stay in the house while we work. The hose runs from the trailer through the attic hatch, so the crew’s traffic through your home is limited to that one route, which gets protected before anything starts.
St. Albert Coverage

Serving All Of St. Albert

Grandin and Akinsdale to Jensen Lakes, measured for free.

Akinsdale · Braeside · Deer Ridge · Erin Ridge · Erin Ridge North · Forest Lawn · Grandin · Heritage Lakes · Inglewood · Jensen Lakes · Kingswood · Lacombe Park · Mission · North Ridge · Oakmont · Pineview · Riverside · Sturgeon Heights · Woodlands

Everything we do here lives on the St. Albert service page, and the full region is on service areas.

Attic Insulation Nearby

Not In St. Albert?

EdmontonAttic Insulation MorinvilleAttic Insulation Spruce GroveAttic Insulation Fort SaskatchewanAttic Insulation
Get In Touch

Request Your Free St. Albert Quote

Tell us a little about your home and we’ll get right back to you with honest, flat-rate pricing — no obligation.

Call Us
780-932-7337
Email Us
info@homeprosgroup.com
Hours
Mon–Sat 8:00 AM – 5:00 PM
Service Area
St. Albert · Greater Edmonton Area

Free Quote Request

No obligation. We’ll reply with flat-rate pricing.

Or call us directly at 780-932-7337

Call Now Free Quote